Price list of plate heat exchangers

77 x 207 mm [5–50 kW; 0.1–4 m3/h] AlfaNova14 plate heat exchanger is intended mainly for one-phase heat transfer processes (water/water) if copper brazing is not an option. This is all-stainless steel version therefore, it can be used in environments with distilled or demineralized water, acids, etc.

94 x 324 mm [10–200 kW; 0.1–6 m3/h] CB20 heat exchanger has small dimensions and is designed for smaller flows. It is easy to install therefore, it is an universal choice for water/water, heating (housing units), and as an oil cooler.

113 x 313 mm [10–200 kW; 0.1–15 m3/h] CB30 heat exchanger is designed for one-phase applications but also as a condenser for heat pumps, as an evaporator. Intended for small capacities, small heat exchanger stations, DHW. Replaces CB26, CB27.

112 x 310 mm [10–200 kW; 0.1–10 m3/h] AlfaNova27 is aimed at one-phase applications (water/water), where using copper brazed exchanger is not an option. This model is made as all stainless steel therefore, can be installed to systems with distilled or demineralized water, acids or into circuits containing free iron which is corrosive to copper brazing. Also suitable as an oil cooler, evaporator.

113 x 527 mm [15–300 kW; 0.2–12 m3/h] CB60 serves a large range of capacities for water/water applications. Suitable as a condenser for higher capacities, for example for condensing units in refrigeration equipment, for heat pumps and so on. Replaces CB52.

111 x 526 mm [10–250 kW; 0.1–10 m3/h] The AlfaNova52 heat exchanger is used for water/water applications if copper brazing is not an option. This unit is made as all stainless steel so it can be used if media causes copper corrosion. Such media are distilled or demineralized water, some acids or water with free iron. Often used also as oil cooler or evaporator.

191 x 616 mm [50–1000 kW; 1–45 m3/h] CB110 heat exchanger was developed for industry, where high capacity is required. It often serves as a water/water and water/oil exchanger. Useful as a condenser for air conditioning, refrigeration and freezing units, industrial refrigerator. Replaces CB76.

191 x 616 mm [1–50 m3/h] CB112 was developed for industry use where large capacity is required. Typical use is for water/water and water/oil. Also for condensing units in refrigeration equipment. The capacity can be higher than with CB110, so also the pressure drop is greater. Replaces CB77.

191 x 618 mm [20–750 kW; 1–30 m3/h] AlfaNova76 plate heat exchanger is all-steel: contains no copper or nickel solder. Used in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. It can serve also as an evaporator, oil cooler.

324 x 742 mm [400–2000 kW; 1–100 m3/h] CB200 was developed for demanding applications in industry. Also for heat exchanger stations. Available with L, M, H channels therefore, it is possible to balance power and pressure drop.

95 x 320 mm [2–100 kW; 0.1–5 m3/h; 3/4"] Compact heat exchanger ideal for applications where smaller flows and extreme efficiency are required. It is a versatile option that can be used for hot water heating, solar heating, and as a separation exchanger.

118 x 289 mm [20–200 kW; 0.1–8 m3/h; 1", 5/4"] Classic heat exchanger designed for use in small output applications, for smaller heat exchanger stations, for oil cooling and other applications.

119 x 525 mm [0.2–8 m3/h; 1"] Designed to serve a wide range of capacities for applications such as water-water exchange stations and oil cooling. DHW tank charging, and heating applications. Often used as a separation exchanger for flows of 3 m3/h and more.

256 x 466 mm [50–1000 kW; 1–40 m3/h; 2"] Ideal for many applications in district heating, heat recovery, heating, combined heat and power production, as an industrial oil cooler, or steam exchanger. The XB52 is the perfect choice for efficient heat exchange with low pressure drop.

73 x 192 mm [2–40 kW; 0.1–4 m3/h; 3/4"] The compact plate heat exchanger SWEP E5 (E5T, E5TH, E5AS, IC5) is extremely efficient and thus price-wise. Also the start and end plates participate in the heat exchange. Used in gas boilers for domestic hot water heating (DHW) or for solar heating systems. This exchanger is short and therefore has very small pressure losses. Serves as a replacement for Alfa Laval CB10, Alfa Laval CB14, Regulus DV193.

73 x 210 mm [5–50 kW; 0.1–4 m3/h; 3/4"] The compact SWEP E6 (E6T, E6TH) heat exchanger is extremely efficient and thus cost-effective: the front and rear plates provide stability and at the same time participate in heat exchange. Designed primarily for gas boilers (water heating, drinking water). Also suitable for solar collectors. Replacement for Alfa Laval CB16.

74 x 315 mm [10–70 kW; 0.1–3 m3/h; 3/4"] The compact heat exchanger SWEP E8 (E8T, E8TH, IC8, IC8T, IC8TH) provides more efficient heat transfer than shorter E5TH, E6TH. It is often an economical option instead of the more expensive version of SWEP B8. For solar systems or as a separating heat exchanger. Variants E8AS and E8LAS are designed mainly for DHW (domestic hot water): they have an asymmetrical arrangement of channels and thus achieve lower pressure losses for these applications. Also suitable as wort chiller. Replacement for Danfoss XB 05.

76 x 193 mm [2–40 kW; 0.1–4 m3/h; 3/4"] The SWEP B5 (B5T, B5TH) heat exchanger is used for small capacities in applications where space is tight. Also ideal as a water or oil cooler. In many applications, it can be fully replaced by the cheaper SWEP E5. Replacement for Alfa Laval AC16, PWO.

76 x 317 mm [10–70 kW; 0.1–3 m3/h; 3/4"] The SWEP B8 (B8T, B8TH) heat exchanger has small dimensions and is designed for smaller flows/capacities. It is easy to install and makes it universal for many water/water applications: heating (residentail units), coolers, etc. It is built for high pressures and the asymmetric variant B8LASH is suitable as a plate heat exchanger for heat pumps (condenser, evaporator). It is a replacement for Alfa Laval CB18, AC18, AC30, Danfoss XB 04, Danfoss XB 06, PWO. In many applications, it can be fully replaced by the cheaper SWEP E8.

119 x 289 mm [20–200 kW; 0.1–8 m3/h; 1"] The SWEP B10 (B10T, B10TH, IC10, IC10T, IC10TH) heat exchanger is suitable for single-phase applications (water/water). It is a classic plate brazed exchanger for small outputs, or for smaller heat exchanger stations, DHW heating, etc. Replacement for Regulus DV285, Alfa Laval CB20, CB26, CB27, CB30, Danfoss XB 10, PWO.

119 x 289 mm The all-stainless steel version of the SWEP B10 heat exchanger uses no copper or nickel solder. Intended for special cases when copper and nickel solder is subject to corrosion (from free iron, distilled or demineralized water, acids). Also suitable if exposed to high temperatures.

119 x 289 mm [10–300 kW; 0.2–16 m3/h; 5/4"] The SWEP B12 heat exchanger has larger ports and is thus adapted for large flows. Also suitable for steam or air. For smaller heating stations, charging the DHW tank, as an oil cooler, steam exchanger or for swimming pools. Replacement for Alfa Laval CB20, CB26, CB27, CB30, Danfoss XB 04, Danfoss XB 12.

119 x 376 mm [40–300 kW; 0.5–16 m3/h; 5/4"] The B16 series is specially designed for water/water applications. SWEP B16 (B16H, IC16) is suitable for heating and hot water (smaller heating stations), oil cooling, etc. Replacement for Danfoss XB 30, PWO.

119 x 376 mm SWEP B26H has an asymmetrical channel arrangement and is especially suitable as an R410A condenser for heat pumps. The B26FH version has no channels around the F3 port and is thus more resistant to freezing. Replacement for Alfa Laval AC40.

119 x 526 mm [0.2–8 m3/h; 1"] SWEP B25 (B25T, B25TH, IC25, IC25TH) serves a large range of capacities for water/water applications (1P-SC-S). SWEP B25 is suitable as a condenser (1P-SC-M) for higher capacities, for example for condensing units in refrigeration equipment, for heat pumps and so on. Replacement for Alfa Laval CB51, CB52, CB60, Danfoss XB 36, Danfoss XB 37, PWO.

119 x 526 mm [50–300 kW; 1–16 m3/h; 5/4"] The SWEP B28 series (B28H, IC28, IC28H) is used where B16 is not sufficient. Designed primarily for water/water applications. SWEP B28 is suitable for heating stations, charging the DHW tank, heating. It is also suitable as a plate hydraulic oil cooler. Replacement for Alfa Laval CB51, CB52, CB60, Regulus DV503, PWO.

119 x 526 mm The SWEP V80 (V80H) evaporator is developed for a range of approximately 30 to 100 kW. This covers most industrial applications where an evaporator is required (air conditioning, refrigeration and freezing units, industrial refrigerators). Replacement for Alfa Laval AC70, AC72, AC73, AC74.

119 x 526 mm SWEP B80 (B80H) is designed for smaller refrigeration applications and for large heat pumps. It is mainly used as a condenser. It has lower pressure losses than B85H, B86H, so it is suitable for larger water flows. Replacement for Alfa Laval CB62, AC72, AC73, AC74.

119 x 526 mm [50–300 kW; 1–16 m3/h; 5/4"] The all-stainless steel version of the SWEP B80 heat exchanger does not use copper or nickel solder. Used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures.

119 x 526 mm [0.5–16 m3/h; 1", 5/4"] SWEP B85 (B85H) is a highly efficient heat exchanger for high performance. It is equipped with larger ports and designed for higher pressures than other exchangers. It is often used as a condenser for large heat pumps and larger refrigeration applications. As a separating exchanger for heat pumps. Replacement for Alfa Laval CB62, AC112, AC120, AC220.

119 x 526 mm [0.5–6 m3/h; 1"] At the cost of higher pressure losses, the SWEP B86 (B86H) is optimized for higher efficiency than B85H. It is designed for higher pressures than other exchangers. Used as a separating exchanger, as a condenser in refrigeration and air conditioning.

243 x 393 mm [50–600 kW; 1–50 m3/h; 2"] Size SWEP B35 (B35H, IC35, B35T, B35TH, B35TM) is ideal for many applications in district heating, heat recovery, heating, combined heat and power, as an industrial oil cooler or steam heat exchanger. SWEP B35 is the perfect choice for efficient heat exchange with low pressure drop. Also available in a version with wider holes for use with large flow rates. Replacement for Danfoss XB 51, Danfoss XB 52, PWO.

243 x 525 mm [1–25 m3/h; 2"] The SWEP B120 series (B120T, B120TH, IC120) was developed mainly for industrial applications where it is necessary to transfer high power in a water/water or water/oil system. SWEP B120T is also used as a condenser in refrigeration and air conditioning. Replacement for Alfa Laval CB110, CB112, CB76, CB77, Danfoss XB 59, Danfoss XB 61, Regulus DV800, PWO.

304 x 694 mm [5–100 m3/h; DN100] SWEP B427 series (B427H, B427M, B427L, IC427) is mainly used in industrial applications and in district heating stations where high power transmission is required. It is availabale in several versions: SWEP B427H, B427L, B427M, so the user can optimize performance and pressure losses. Replacement for Alfa Laval CB200, Danfoss XB 66.