We have hundreds of exchangers in stock
Titanium plate exchanger SWEP Minex M10NHx10
Titanium plate exchanger SWEP Minex M10NHx10
Price without VAT: 930.00 € (Price with VAT: 1,125.30 €) from factory (about 8 weeks) Connections: 4x ext. thread 1" NPT Titanium |
| Typical use: | Small titanium exchanger (titanium steel) with EPDM or NBR gaskets. Frame is from stainless steel AISI 316. It does not need the typical support used for traditional gasketed heat exchangers. |
| Recommended max. flow 1): | 1.3 m3/h |
| Brazing material: | gaskets from NBR, EPDM or Viton |
| Model version: | titanium plate heat exchanger |
| Dimensions (H × W × D): | 287 × 116 × 43 mm |
| Working limit: | 10 bar |
| Testing pressure: | 15 bar |
| Weight: | 7.1 kg |
| Product sheet: | Minex_M10.pdf  |
| Item No. 3): | | - | M10NHx10/1P-CTN-S | | - | M10NHx10/1P-CTE-S | | - | M10NHx10/1P-STN-S | 13627-010 | M10NHx10/1P-STE-S 4xNPT 1" Ti |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 3) | CSN-S frame: galvanized carbon steel
SSN-S frame: AISI 316 stainless steel
CSN-S plates: AISI 316 stainess steel
CTN-S plates: titanium steel
CSN-S gaskets NBR
CSE-S gaskets EPDM |
Titanium plate exchanger SWEP Minex M10NHx20
Titanium plate exchanger SWEP Minex M10NHx20
Price without VAT: 1,370.00 € (Price with VAT: 1,657.70 €) from factory (about 8 weeks) Connections: 4x ext. thread 1" NPT Titanium |
| Typical use: | Small titanium exchanger (titanium steel) with EPDM or NBR gaskets. Frame is from stainless steel AISI 316. It does not need the typical support used for traditional gasketed heat exchangers. |
| Recommended max. flow 1): | 2.5 m3/h |
| Brazing material: | gaskets from NBR, EPDM or Viton |
| Model version: | titanium plate heat exchanger |
| Dimensions (H × W × D): | 287 × 116 × 66 mm |
| Working limit: | 10 bar |
| Testing pressure: | 15 bar |
| Weight: | 8.2 kg |
| Product sheet: | Minex_M10.pdf |
| Item No. 3): | | - | M10NHx20/1P-CTN-S | | - | M10NHx20/1P-CTE-S | | - | M10NHx20/1P-STN-S | 13627-020 | M10NHx20/1P-STE-S 4xNPT 1" Ti |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 3) | CSN-S frame: galvanized carbon steel
SSN-S frame: AISI 316 stainless steel
CSN-S plates: AISI 316 stainess steel
CTN-S plates: titanium steel
CSN-S gaskets NBR
CSE-S gaskets EPDM |
Titanium plate exchanger SWEP Minex M10NHx30
Titanium plate exchanger SWEP Minex M10NHx30
Price without VAT: 1,800.00 € (Price with VAT: 2,178.00 €) from factory (about 8 weeks) Connections: 4x ext. thread 1" NPT Titanium |
| Typical use: | Small titanium exchanger (titanium steel) with EPDM or NBR gaskets. Frame is from stainless steel AISI 316. It does not need the typical support used for traditional gasketed heat exchangers. |
| Recommended max. flow 1): | 4 m3/h |
| Brazing material: | gaskets from NBR, EPDM or Viton |
| Model version: | titanium plate heat exchanger |
| Dimensions (H × W × D): | 287 × 116 × 89 mm |
| Working limit: | 10 bar |
| Testing pressure: | 15 bar |
| Weight: | 9.3 kg |
| Product sheet: | Minex_M10.pdf |
| Item No. 3): | | - | M10NHx30/1P-CTN-S | | - | M10NHx30/1P-CTE-S | | - | M10NHx30/1P-STN-S | 13627-030 | M10NHx30/1P-STE-S 4xNPT 1" Ti |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 3) | CSN-S frame: galvanized carbon steel
SSN-S frame: AISI 316 stainless steel
CSN-S plates: AISI 316 stainess steel
CTN-S plates: titanium steel
CSN-S gaskets NBR
CSE-S gaskets EPDM |
Titanium plate exchanger SWEP Minex M10NHx40
Titanium plate exchanger SWEP Minex M10NHx40
Price without VAT: 2,250.00 € (Price with VAT: 2,722.50 €) from factory (about 8 weeks) Connections: 4x ext. thread 1" NPT Titanium |
| Typical use: | Small titanium exchanger (titanium steel) with EPDM or NBR gaskets. Frame is from stainless steel AISI 316. It does not need the typical support used for traditional gasketed heat exchangers. |
| Recommended max. flow 1): | 5 m3/h |
| Brazing material: | gaskets from NBR, EPDM or Viton |
| Model version: | titanium plate heat exchanger |
| Dimensions (H × W × D): | 287 × 116 × 111 mm |
| Working limit: | 10 bar |
| Testing pressure: | 15 bar |
| Weight: | 10.4 kg |
| Product sheet: | Minex_M10.pdf |
| Item No. 3): | | - | M10NHx40/1P-CTN-S | | - | M10NHx40/1P-CTE-S | | - | M10NHx40/1P-STN-S | 13627-040 | M10NHx40/1P-STE-S 4xNPT 1" Ti |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 3) | CSN-S frame: galvanized carbon steel
SSN-S frame: AISI 316 stainless steel
CSN-S plates: AISI 316 stainess steel
CTN-S plates: titanium steel
CSN-S gaskets NBR
CSE-S gaskets EPDM |
Titanium plate exchanger SWEP Minex M10NHx50
Titanium plate exchanger SWEP Minex M10NHx50
Price without VAT: 2,650.00 € (Price with VAT: 3,206.50 €) from factory (about 8 weeks) Connections: 4x ext. thread 1" NPT Titanium |
| Typical use: | Small titanium exchanger (titanium steel) with EPDM or NBR gaskets. Frame is from stainless steel AISI 316. It does not need the typical support used for traditional gasketed heat exchangers. |
| Recommended max. flow 1): | 6 m3/h |
| Brazing material: | gaskets from NBR, EPDM or Viton |
| Model version: | titanium plate heat exchanger |
| Dimensions (H × W × D): | 287 × 116 × 134 mm |
| Working limit: | 10 bar |
| Testing pressure: | 15 bar |
| Weight: | 11.5 kg |
| Product sheet: | Minex_M10.pdf |
| Item No. 3): | | - | M10NHx50/1P-CTN-S | | - | M10NHx50/1P-CTE-S | | - | M10NHx50/1P-STN-S | 13627-050 | M10NHx50/1P-STE-S 4xNPT 1" Ti |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 3) | CSN-S frame: galvanized carbon steel
SSN-S frame: AISI 316 stainless steel
CSN-S plates: AISI 316 stainess steel
CTN-S plates: titanium steel
CSN-S gaskets NBR
CSE-S gaskets EPDM |
Chat
⬤
VZH Ostrava, s.r.o.
Pohraniční 1280/112
703 00 Ostrava-Vítkovice
Czech Republic
| L | +44 74 9187 2667 |
| E | +44 74 9187 2667 |
| B | info@heat-exchangers.uk |
| sales@heat-exchangers.uk |
CZ 
SK 
DE