We have hundreds of exchangers in stock
Heating
Heat pumps
Solars
Beer wort
Pools
Oil cooling
Industry
SWEP B80Hx70 Plate condenser
SWEP B80Hx70 Plate condenser
| Price without VAT: |
620.00 € |
| Price with VAT: | 750.20 € |
| Availability: | availability on request |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 35 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side. Can be replaced by B85Hx100. |
| Recommended max. flow 1): | 8 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 167 mm |
| Related products: | Insulation: EPP 25Tx80, HVAC 25Tx80, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 15.5 kg |
| Product sheet: | B80H.pdf  |
| Item No. 2): | | 14239-070 | B80Hx70/1P-SC-M 2x35.1(27)+2x1 1/4"&28U(27) | | - | B80Hx70/1P-SC-S | | - | B80Hx70/1P-SC-F | | - | B80Hx70/1P-SC-H |
|
| Connections: | 14239-070 | 2x solder ø35.1 + 2x 5/4" ISO G ext. thread (combo) |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 2) | SC-Y intermediate pressure: for water/water use (approx. 20 bar)
SC-S standard pressure: for water/water use, some refrigerants (approx. 30 bar)
SC-M medium pressure: for refrigerants (approx. 48 bar)
SC-F intermediate pressure: for refrigerants (approx. 50 bar)
SC-H high pressure: for refrigerants (approx. 55 bar)
SC-D, SC-E higher pressure: for CO2 (approx. 55 bar)
SC-U ultra high pressure: for CO2 (approx. 100 bar)
SC-S: plates AISI 316, copper brazing
NSC-M: plates AISI 316, cover plates AISI 304, copper brazing
NC-S: plates AISI 304, copper brazing
SN-S: plates AISI 316, nickel brazing
MC-S: plates SMO 254, copper brazing
SPS-S: plates AISI 316, AISI 316 brazing (All Steel) |
SWEP B80Hx20 Plate condenser
SWEP B80Hx20 Plate condenser
| Price without VAT: |
320.00 € |
| Price with VAT: | 387.20 € |
| Delivery costs: | EU 19 € (we deliver only to the EU) |
| Availability: | in 3 days |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 10 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side.
Can be replaced by B25THx30, B85Hx30. |
| Recommended max. flow 1): | 2.5 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 56 mm |
| Related products: | Insulation: EPP 25Tx20, HVAC 25Tx40, Ref 28x40. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 7.5 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | 14239-020 | B80Hx20/1P-SC-M 2x35.1(27)+2x1 1/4"&28U(27) | | - | B80Hx20/1P-SC-S | | - | B80Hx20/1P-SC-F | | - | B80Hx20/1P-SC-H |
|
| Connections: | 14239-020 | 2x solder ø35.1 + 2x 5/4" ISO G ext. thread (combo) |
|
| | |
SWEP B80Hx30 Plate condenser
SWEP B80Hx30 Plate condenser
Price without VAT: 375.00 € (Price with VAT: 453.75 €) 1 in stock Connections: 2x solder ø35.1 + 2x 5/4" ISO G ext. thread (combo) Price without VAT: 375.00 € (Price with VAT: 453.75 €) 3 in stock Connections: solder ø12.8 + 22U + 2x 5/4" ISO G ext. thread (combo) |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 15 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side.
Can be replaced by B25THx40, B85Hx40 if used as a condenser. |
| Recommended max. flow 1): | 3.5 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 77 mm |
| Related products: | Insulation: EPP 25Tx30, HVAC 25Tx40, Ref 28x40. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 9 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | 14239-030 | B80Hx30/1P-SC-M 2x35.1(27)+2x1 1/4"&28U(27) | | 13939-030 | B80Hx30/1P-SC-S 12.8+22U+2x1 1/4"&28U | | - | B80Hx30/1P-SC-F | | - | B80Hx30/1P-SC-H |
|
| | |
SWEP B80Hx40 Plate condenser
SWEP B80Hx40 Plate condenser
Price without VAT: 440.00 € (Price with VAT: 532.40 €) 2 in stock Connections: 2x solder ø35.1 + 2x 5/4" ISO G ext. thread (combo) Price without VAT: 440.00 € (Price with VAT: 532.40 €) in 3 days Connections: solder ø12.8 + 22U + 2x 5/4" ISO G ext. thread (combo) |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 20 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side. Can be replaced by B25THx50, B85Hx50. |
| Recommended max. flow 1): | 5 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 100 mm |
| Related products: | Insulation: EPP 25Tx40, HVAC 25Tx40, Ref 28x40. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 11 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | 14239-040 | B80Hx40/1P-SC-M 2x35.1(27)+2x1 1/4"&28U(27) | | 13939-040 | B80Hx40/1P-SC-S 12.8+22U+2x1 1/4"&28U | | - | B80Hx40/1P-SC-F | | - | B80Hx40/1P-SC-H |
|
| | |
SWEP B80Hx50 Plate condenser
SWEP B80Hx50 Plate condenser
| Price without VAT: |
500.00 € |
| Price with VAT: | 605.00 € |
| Availability: | in 3 days |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 25 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side. Can be replaced by B25THx70, B85Hx70. |
| Recommended max. flow 1): | 6 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 122 mm |
| Related products: | Insulation: EPP 25Tx60, HVAC 25Tx60, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 12.5 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | 14239-050 | B80Hx50/1P-SC-M 2x35.1(27)+2x1 1/4"&28U(27) | | - | B80Hx50/1P-SC-S | | - | B80Hx50/1P-SC-F | | - | B80Hx50/1P-SC-H |
|
| Connections: | 14239-050 | 2x solder ø35.1 + 2x 5/4" ISO G ext. thread (combo) |
|
| | |
SWEP B80Hx60 Plate condenser
SWEP B80Hx60 Plate condenser
| Price without VAT: |
570.00 € |
| Price with VAT: | 689.70 € |
| Availability: | in 3 days |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 30 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side. Can be replaced by B85Hx80. |
| Recommended max. flow 1): | 7 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 145 mm |
| Related products: | Insulation: EPP 25Tx60, HVAC 25Tx60, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 14 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | 14239-060 | B80Hx60/1P-SC-M 2x35.1(27)+2x1 1/4"&28U(27) | | - | B80Hx60/1P-SC-S | | - | B80Hx60/1P-SC-F | | - | B80Hx60/1P-SC-H |
|
| Connections: | 14239-060 | 2x solder ø35.1 + 2x 5/4" ISO G ext. thread (combo) |
|
| | |
SWEP B80Hx80 Plate condenser
SWEP B80Hx80 Plate condenser
| Price without VAT: |
750.00 € |
| Price with VAT: | 907.50 € |
| Availability: | in 3 days |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 40 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side. Can be replaced by B85Hx100. |
| Recommended max. flow 1): | 10 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 191 mm |
| Related products: | Insulation: EPP 25Tx80, HVAC 25Tx80, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 17.5 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | - | B80Hx80/1P-SC-M | | - | B80Hx80/1P-SC-S | | 15367-080 | B80Hx80/1P-SC-F 22U(27)+35.1(27)+2x1 1/4"&28U(27) | | - | B80Hx80/1P-SC-H |
|
| Connections: | 15367-080 | solder 22U + ø35.1 + 2x 5/4" ISO G ext. thread (combo) |
|
| | |
SWEP B80Hx90 Plate condenser
SWEP B80Hx90 Plate condenser
| Price without VAT: |
810.00 € |
| Price with VAT: | 980.10 € |
| Availability: | in 3 days |
| Typical use: | Heat exchanger for medium and large heat loads. Suitable e.g. for cooling systems and larger heat pumps (around 45 kW). It has lower pressure losses than B85H, B86H, so it is suitable if a large flow is designed on the water side. Can be replaced by B85Hx120. |
| Recommended max. flow 1): | 11 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 526 × 119 × 214 mm |
| Related products: | Insulation: EPP 25Tx100, HVAC 25Tx100, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 19 kg |
| Product sheet: | B80H.pdf |
| Item No. 2): | | - | 80Hx90/1P-SC-M | | - | B80Hx90/1P-SC-S | | 15367-090 | B80Hx90/1P-SC-F 22U(27)+35.1(27)+2x1 1/4"&28U(27) | | - | B80Hx90/1P-SC-H |
|
| Connections: | 15367-090 | solder 22U + ø35.1 + 2x 5/4" ISO G ext. thread (combo) |
|
| | |
Chat
⬤
VZH Ostrava, s.r.o.
Pohraniční 1280/112
703 00 Ostrava-Vítkovice
Czech Republic
| L | +44 74 9187 2667 |
| E | +44 74 9187 2667 |
| B | info@heat-exchangers.uk |
| sales@heat-exchangers.uk |
CZ 
SK 
DE