We have hundreds of exchangers in stock
Heating
Heat pumps
Solars
Beer wort
Pools
Oil cooling
Industry
All-stainless steel SWEP B80SHx60
All-stainless steel SWEP B80SHx60
| Price without VAT: |
1,670.00 € |
| Price with VAT: | 2,020.70 € |
| Availability: | 1 in stock |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (150 to 300 kW) |
| Recommended max. flow 1): | 8 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 153 mm |
| Related products: | Insulation EPP 25Tx60, HVAC 25Tx60, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 17 kg |
| Product sheet: | B80SH-AllSteel.pdf  |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 2) | SC-Y intermediate pressure: for water/water use (approx. 20 bar)
SC-S standard pressure: for water/water use, some refrigerants (approx. 30 bar)
SC-M medium pressure: for refrigerants (approx. 48 bar)
SC-F intermediate pressure: for refrigerants (approx. 50 bar)
SC-H high pressure: for refrigerants (approx. 55 bar)
SC-D, SC-E higher pressure: for CO2 (approx. 55 bar)
SC-U ultra high pressure: for CO2 (approx. 100 bar)
SC-S: plates AISI 316, copper brazing
NSC-M: plates AISI 316, cover plates AISI 304, copper brazing
NC-S: plates AISI 304, copper brazing
SN-S: plates AISI 316, nickel brazing
MC-S: plates SMO 254, copper brazing
SPS-S: plates AISI 316, AISI 316 brazing (All Steel) |
All-stainless steel SWEP B80SHx100
All-stainless steel SWEP B80SHx100
| Price without VAT: |
2,300.00 € |
| Price with VAT: | 2,783.00 € |
| Availability: | availability on request |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (250 to 500 kW) |
| Recommended max. flow 1): | 12.5 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 249 mm |
| Related products: | Insulation HVAC 25Tx100, Ref 28x140. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 26.5 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx110
All-stainless steel SWEP B80SHx110
| Price without VAT: |
2,450.00 € |
| Price with VAT: | 2,964.50 € |
| Availability: | availability on request |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (270 to 550 kW) |
| Recommended max. flow 1): | 13.5 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 273 mm |
| Related products: | Insulation HVAC 25Tx120, Ref 28x140. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 28.5 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx130
All-stainless steel SWEP B80SHx130
| Price without VAT: |
2,750.00 € |
| Price with VAT: | 3,327.50 € |
| Availability: | availability on request |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (320 to 650 kW) |
| Recommended max. flow 1): | 15 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 321 mm |
| Related products: | Insulation HVAC 25Tx140, Ref 28x140. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 33.5 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | 16640-130 | B80SHx130/1P-SPS-M 4x1 1/4"&28U(27) |
|
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx140
All-stainless steel SWEP B80SHx140
| Price without VAT: |
2,900.00 € |
| Price with VAT: | 3,509.00 € |
| Availability: | availability on request |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (350 to 700 kW) |
| Recommended max. flow 1): | 16 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 345 mm |
| Related products: | Insulation HVAC 25Tx140, Ref 28x140. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 35.5 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | 16640-140 | B80SHx140/1P-SPS-M 4x1 1/4"&28U(27) |
|
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx20
All-stainless steel SWEP B80SHx20
| Price without VAT: |
1,030.00 € |
| Price with VAT: | 1,246.30 € |
| Availability: | availability on request |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (50 to 100 kW) |
| Recommended max. flow 1): | 2.5 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 58 mm |
| Related products: | Insulation EPP 25Tx20, HVAC 25Tx40, Ref 28x40. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 8 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx30
All-stainless steel SWEP B80SHx30
| Price without VAT: |
1,190.00 € |
| Price with VAT: | 1,439.90 € |
| Availability: | 1 in stock |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (70 to 150 kW) |
| Recommended max. flow 1): | 4 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 82 mm |
| Related products: | Insulation EPP 25Tx40, HVAC 25Tx40, Ref 28x40. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 10 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx40
All-stainless steel SWEP B80SHx40
| Price without VAT: |
1,350.00 € |
| Price with VAT: | 1,633.50 € |
| Availability: | 1 in stock |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (100 to 200 kW) |
| Recommended max. flow 1): | 5.5 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 106 mm |
| Related products: | Insulation EPP 25Tx40, HVAC 25Tx40, Ref 28x40. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 12.5 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx50
All-stainless steel SWEP B80SHx50
| Price without VAT: |
1,510.00 € |
| Price with VAT: | 1,827.10 € |
| Availability: | 1 in stock |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (120 to 250 kW) |
| Recommended max. flow 1): | 7 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 130 mm |
| Related products: | Insulation EPP 25Tx60, HVAC 25Tx60, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 15 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
All-stainless steel SWEP B80SHx80
All-stainless steel SWEP B80SHx80
| Price without VAT: |
1,990.00 € |
| Price with VAT: | 2,407.90 € |
| Availability: | 1 in stock |
| Typical use: | The all-stainless steel version of the SWEP B80H/B28H heat exchanger does not use copper or nickel solder. It is used only in special cases when copper and nickel solder is subject to corrosion (e.g. from free iron, distilled or DEMI water, acids) or where the exchanger is exposed to high temperatures. (200 to 400 kW) |
| Recommended max. flow 1): | 10.5 m3/h |
| Brazing material: | all-stainless steel |
| Model version: | all-stainless steel |
| Dimensions (H × W × D): | 526 × 119 × 201 mm |
| Related products: | Insulation EPP 25Tx80, HVAC 25Tx80, Ref 28x100. Welding sleeve: 5/4" to DN25, 5/4" to DN32. |
| Weight: | 21.5 kg |
| Product sheet: | B80SH-AllSteel.pdf |
| Item No. 2): | |
| Connections: | 4x 5/4" ISO G ext. thread (combo) |
| | |
Chat
⬤
VZH Ostrava, s.r.o.
Pohraniční 1280/112
703 00 Ostrava-Vítkovice
Czech Republic
| L | +44 74 9187 2667 |
| E | +44 74 9187 2667 |
| B | info@heat-exchangers.uk |
| sales@heat-exchangers.uk |
CZ 
SK 
DE